Top 11 Best Skateboard Hardware (Buying Guide 2021)
One of the key components of a skateboard is that you should never cheap out on is the hardware. Whether you're a professional skateboarder or you're just getting started you need the best parts for your board to avoid accidents or mishaps.
According to the National Safety Council research done in 2007 showed that over 98000 people had to be taken to the emergency room because of an accident that was related to skateboarding.
If you don’t want to end up on that list, it is time for you to get the best skateboard hardware that you can afford. To make things easier for you, we have included down below all the things you need to know before you make a purchase.
Top 11 Best Skateboard Hardware Review
Over thousands of skateboard hardware is produced and marketed every year. How would you know which one to choose for your longboard? To make this task easier for you, we have listed down below some of the best hardware for skateboards that have great reviews and are loved by all.
01. Fireball Dragon Stainless Steel Skateboard Hardware Set
Don’t you hate it when you fall in love with a hardware set that is the perfect size and is built with the perfect material but is not the type you want? Fireball is here to solve that.
They give you all the options, Flat Allen, Button Allen, and Flat Phillips to choose from. Made with pure and hard stainless steel these will surely last a long time even with regular use.
A special coating or washing helps these bolts resist stripping. They cause no harm to your performance or your board. To avoid cold welding the buts are constructed of zinc.
No matter what style or size your skateboard is, Fireball has something for everyone. They offer 8 different sizes and are easy to install. This combined with the fact that they are so easy to install makes this the perfect choice for beginners.
On the other hand, the industrial quality build makes this suitable for professionals as well. Fireball has been in the market since 2009.
Tested by many professional long-boarders all across the world this brand is well reputed and lives up to the expectations of the brand’s customers.
- Bolts do not rust
- Nuts made with zinc to avoid cold welding and bolts made of stainless steel
- 8 different sizes to choose from
- Available in Button Allen, Flat Phillip, and Flat Allen type
- Easy to install
- No stripping or harm is done to your skateboard
- Needs to be tightened carefully or else might break
02. Bones 1-Inch Skateboard Mounting Hardware
Flat Phillips bolts are a delight to have because of how easy they are to install. All you need to assemble these Bones 1-inch skateboard hardware is a good set of Phillips screwdrivers.
Bones 1 inch is a brand that has been around for ages as a supplier of good quality skateboarding parts and an inspiration as well. They focus on product performance and real value.
Many professional skateboarders such as Tony Hawk and Jordan Sharkey support and recommend hardware and parts from Bones 1 inch. This set comes with Flat Phillips that is colored white.
An addition such as this one is great to have for beginners as it shows them the correct foot placement. As this helps you locate the tail and the head of your longboard this can be a great option for beginners.
The bolts flush into the surface of your skateboard which is a great thing if you don’t like the bumps that Button Allens give you. In the package, you get a set of 8 bolts.
Bolts 1 inch is also the brand you want to consider if you want a product that is available at an affordable price and performs well.
- Heads Painted white to help you understand the foot placement
- Flushes or melts into the surface of your longboard
- More comfortable ride; no bumps
- Regular maintenance not needed
- Available at a reasonable price
- The white paint on the head of the bolt chips off with use
03. VJ Longboard Skateboards Cruiser Hardware Screws
Screws and bolts that have ranked number 4 on amazon’s skateboard hardware list will surely not disappoint you. VJ longboard has also been featured as one of the significantly durable and trustworthy product on the Top 100 sports and hardware list.
At first glance, you'll understand just how durable these bolts are. Once you screw them in they are in there for the long haul. Even if you use your longboard quite regularly there is no need for frequent maintenance.
Even if you over-torque, these screws won’t risk stripping or breaking the bolts. So the set is quite user-friendly. If you know the right size of bolts you need, these will fit perfectly.
Unlike some other hardware brands, there is no irregularity in the size of these bolts. The size is also quite accurate to what is stated on the chart. The set includes all 8 nuts and bolts that you will need for the setup.
As these are Flat Phillip style bolts you won't have to worry about the installation process. Just screw these in with the help of a Phillip screwdriver and you’re good to go.
As the bolts are quite flexible as well, you can use these on longboards, cruiser skateboards, or even any kind of skateboard you own. There are no limitations.
- Accurate Size chart
- Built to last
- Does not break even with over-torque
- Flexible bolts that can be used on longboards and cruiser skateboards as well
- The black paint might get scratches and chip off
04. Kata Skateboarding 100 Pack Skateboarding Standard Speed Washers
Although it might not seem like it, washers are a very important part of your skateboard hardware as well. They provide a barrier between the bearing and the nut which prevents stripping.
That is why you should get this pack of 100 washers from Kata Skateboarding. Made with high-quality metal these won't bend or break easily. Iron coated zinc washers rarely have any complaining customers.
A good pack of 100 washers that is available at such a price is a steal if you ask us! This pack is a must if you use your longboard regularly.
With the help of these washers, you will be able to ride faster and smoother. Wheels on your skateboard will now rotate faster and will get protection from the bearing thanks to the washers.
Using washers has also resulted in the longevity of the bearings on your skateboard to increase significantly. This is because the washers prevent the bearings from seizing or exploding.
Less stress is put on the bearings making your ride a lot safer. Available in both silver and black you can choose ones that match the color of your longboard or create a contrasting look.
- Iron coated zinc washers
- Pack of 100 available at a great price
- Helps you ride faster and smoother
- Prevents bearings from seizing, exploding and reduces the pressure put on them
- Available in both black and silver
- +/- 0.02 mm precision tolerance
- Some of the washers come in different sizes amongst the 100
05. INDEPENDENT Skateboard Hardware
If you're looking for hardware for professional skateboard riding, Independent hardware is the brand to choose from. They have been the first choice of many professional skateboarders since 1978.
So you know they’re not fooling around when they say that they make the best and most durable skateboard hardware. The contrast of black and gold makes these bolts stand out in the crowd helping you make a statement.
As the bolts are a classic Flat Phillip you won’t feel any bulge on your feet when they are installed. But this also means that you don’t get the foot placement and grip that Button Allens give you.
At a professional level, this guidance is considered unnecessary, so we're sure you can do it without that. Fix up the hardware at home within just an hour max. The instructions are pretty simple and well detailed.
You might need to screw them on a bit tighter after a few uses. This is if you use the board quite regularly and in a rough style. The maintenance will only take a few seconds but will make great improvements in your riding style.
- Comfortable no bulge style bolts
- Easy to screw on; total installation takes about an hour at max
- Made with high-quality material that does not break
- Paint on the gold bolts does not chip
- Great for professional use
- Needs a bit of maintenance for better performance if used regularly
06. Independent Genuine Parts Allen Hardware - Black - 1"
This is not the most affordable hardware that you can get in the market, but trust us, the price is worth it. You are paying for premium quality hardware that won’t chip and will last for ages.
Ranked as number 42 in the Amazon's skateboard hardware list, this hardware has nothing but good reviews to back up the Manufacturer’s statements.
Even during installation, any collision of the bolts with your longboard won’t cause any damage to the surface. The bolts have a special coating which helps them act smoother and gentler with the longboard.
Once installed, there is no need for frequent tightening. You could do this once in a blue moon for the mental satisfaction, but once you screw on the bolts according to the tightness you need, they will stay there forever.
The bolts come with a shaft that is extended and unthreaded. This makes the bolts even better for the longboard as they cause less damage.
Use these on old, rusty skateboards or brand new ones to boost your performance. Get bolts that have a longer length if you want to add risers to your board.
- Sturdy and unbreakable construction
- Needs no maintenance
- Works in harmony with risers or washers of any kind
- Good range of lengths to choose from
- Comes in a recyclable bag
- Can be used on both used, old skateboards and fresh new ones as well
- No harm is done to the surface of skateboard even during the installation
- No significant cons
07. Independent Genuine Hardware 1.5 in Phillips Skateboard Longboard
A lot of people face difficulties setting up their hardware with their skateboard. Many have complained that they get scratches and damage their board even when trying to get the bolts in.
If you are frustrated because of the same issue, you can take a look at these Independent Genuine Hardware 1.5 Phillips longboard hardware. They have an extended and unthreaded shaft that prevents this even after the installation of the bolts.
Flat Phillip bolts such as this one are easy to install because chances are you already have the one tool, a Phillip screwdriver, you need to set this thing up at home already.
These are also great as you can barely notice them when you ride your longboard. Nylon lock nuts are lightweight and so cannot be felt when turning or riding fast.
This set is perfect for old Skool skateboards, longboards, and also cruisers. The 1.5-inch hardware set can be used with risers that are ½ inch in size. You could also give these a go on your extra thick skateboard or boards that have angled risers.
- Includes enough bolts and nuts to mount two skateboard trucks
- Compatible with ½ inch risers, skateboards that are thick and skateboards with angled risers
- Nylon nuts that are almost weightless
- Flat Phillip Bolts that you can barely notice when riding
- Extended shafts that keep the surface of your longboard safe even after installation
- Some found that the bolts were longer than stated
08. INDEPENDENT Genuine Parts Phillips Hardware 1 1/4" Black
With the best hardware skateboard, you can achieve unimaginable goals. This is our last recommendation from Independent but surely is not the least.
Just like all the other Independent Hardware sets on our list, this one too holds a position of being number 57 on the skateboard hardware list!
Made with a self-locking system, these bolts settle in the skateboard almost permanently. There is no way a bolt is getting loose if you have screwed it on tightly.
Therefore, you don't need much maintenance on these skateboards. Use your longboard whenever, wherever without having to worry about tightening bolts and nuts.
Moreover, these are also the bolts to go for if you want a hardware set that is in for the long run. Made to be used professionally, these bolts have quite a sturdy construction.
People rarely need a replacement when they have these bolts set in their skateboard.
When the self-locking feature is combined with Flat Phillip type bolts such as this one you get a setup that is seamless. You won't even notice that the bolts are there.
We understand that some riders prefer this over Button Allens which bulges on your feet.
- Will not break apart anytime soon
- The self-locking feature keeps the bolts and nuts in place
- Flat and seamless finish
- Helps wheels rotate better for smoother and faster rides
- Can be too large for boards that do not have spacers
09. 1 Inch Color Skateboard Mounting Hardware Screws Bolts
These bolts available from multiple sellers on Amazon might not be from a reputed brand, but they serve well. They are rated to be number 55 on the skateboard hardware list!
Many users have said that not only did they benefit from using the bolts on their skateboards but they used them for many other purposes such as screwing on their license plates as well.
Bolts that have multiple functionalities are great because they can be reused more than once or twice. As the bolts come in a large array of colors you can choose funky colors that match or add a fun pop of color to your skateboard.
This is also one of the reasons why this is a fan favorite and a hit amongst teenagers and kids. Available in 1 inch these are the best skateboard hardware sizes for kids as well.
Colors of the bolts do not chip off even if used regularly. These keep looking clean and brand new even after months of usage. The set of 8 bolts are in a flat Phillips head style. So they can be screwed on and off in seconds.
- Flat Phillips head that can be screwed on and off in seconds
- Colors of the bolt do not chip off
- Available in many different colors
- Can be used on things such as license plates besides skateboards
- Needs Grip take, cut to the perfect length and shape, for the perfect fit
10. Everland Eskape 1.25-inch Hardware Screws
Hardware sets that come in different colors are always fun to look at! Besides being great for improving the overall ride quality, bearing, and wheel rotation, these bolts also add a lot to the design of your skateboard.
So that everyone can use them without any trouble, these come in a Flat Phillips style. Popular for being easy to set up, this style of Hardware is great for both beginners and professionals.
This is because anyone can assemble them, and they also have a seamless finish. If you want to make some minor changes to your skateboard to improve the way you ride, it can be a great inexpensive option.
However, all you get in this set are the bolts and the nuts, there is no riser or spacer or washer included. They are 1.25 inch high so you might want to check if they are compatible with any existing risers that you might have.
The set is compatible with all kinds of skateboards that are of “popsicle” variety. If your board is longer or more advanced, these might not be long enough for you.
You can also put these on older skateboards and they’ll work like they’re brand new.
- Different color options
- Almost melts into the surface of your skateboard; cannot be felt when riding
- Inexpensive and always available
- Accurate size and fitting
- Keeps trucks in place
- Size is not long enough for most skateboards that have risers
- The paint of the hardware comes off too easily
11. TOBWOLF 8PCS Inline Skate Replacement Shaft
If you search for the best Skateboard Hardware Reddit on google, you will see the increasing popularity of Aluminum bolts. These aluminum alloy bolts are all the rage at the moment and there is no other brand than TOBWOLF that we trust.
Because the bolts are made of aluminum alloy you get more flexibility. Hence, rotation of the wheels is made easier and heat is also easily dissipated.
Furthermore, the set comes with 8 spacers, 8 axel screws, 16 side plugs, 2 wrenches, and 8 30mm axels. All that you would need to get the perfect set up is included in this set.
The spacers, axels, and screws join together to help out the bearing on your skateboard. This happens as less stress is put on the bearing now. With less stress, your bearing can now move more smoothly.
Sudden collapses are also taken care of by this setup. As there are so many parts, you might think that the set up will become confusing.
To tackle this conundrum the brand has made matching the parts to your skateboard easier. No matter what kind of wheels or skateboard you have, this flexible set will work with it without any difficulty.
- Made with aluminum alloy
- Lasts a lot longer than any other skateboard alloy
- Easy to match the parts to the skateboard for less confusing setup
- More flexibility, so wheels rotate more smoothly
- Prevents Bearing from collapsing
- Some users face problems getting the size right
What Are the Best Skateboard Hardware?
Without good quality skateboard hardware, you risk causing damage to your board and also increase the chances of accidents. We have listed down below some of the best skateboard hardware brands according to us.
This is one of the best brands to consider when buying any part for your skateboard. They offer 8 different sizes and come with thorough instruction.
You get washers, lock nuts, bolts, and all that you would need for the perfect set up.
If durability is what you are looking for, this is the brand to go for. Independent Genuine offers 4 sizes, which is not the widest range but if the size fits your skateboard we highly suggest getting hardware from this brand.
You won’t have to worry about replacements any time soon.
Bones 1 inch
Although Bones offers only one size of bolts, the brand made headlines and was featured in many skateboard blogs such as River’s Vibe. This brand also makes bolts that are durable and last quite a long time.
VJ Skateshop Screws
The brand offers skateboard equipment in quite a lot of places around the world. Therefore, the availability and ease of access have given this brand a lot of its popularity.
Moreover, the bolts from this brand are great for both pros and beginners and are also quite easy to install.
How Does the Best Skateboard Hardware Work?
The hardware that you buy for your skateboard comes with 8 to 10 pieces of bolts that help you attach any risers to your board. You also use them to attach trucks to the board.
Without the best hardware for skateboard, these parts of your board could easily come off and cause accidents that have a permanent impact on your life.
In many reports, Thrasher Magazine has highlighted the importance of good quality skateboard hardware. The hardware kits come in different sizes that match the dimensions of your skateboard.
Bolts are made of stainless steel or some kind of metal. Some of these also come with washers that help protect your skateboard from stripping or getting scratches.
Additionally, the finest skateboard hardware will be made of a material that lasts a long time, does not need too much maintenance, is not affected when exposed to water, and also doesn't have any negative effect on your performance.
When you choose a hardware kit that is compatible with your skateboard you will notice an immediate change in the way you ride.
Some bolts, especially Button Allens give you a better grip and can be a great set for beginners who are trying to get their form and turns right.
Types of Skateboard Hardware and Differences
In this best skateboard hardware review guide, we've covered the features and advantages of all the kinds of hardware you can get on the market.
Below, we’ll go through the types of skateboard hardware and the differences between them.
One of the main differences between a Flat Phillip or a Flat Allen and a Button Allen is that this bolt sticks out. Many people purchase this bolt because of the way it looks.
You'll find on Fireball's website, which is one of the best brands for skateboard supplies, that you can feel this kind of bolts on your feet quite significantly.
Because they sit atop of the surface they might cause some discomfort while riding the board. But some riders feel that this gives them more grip allowing them to get better control over turns and also better foot placement.
To tighten or adjust these bolts you will need a 1/8 inch Allen driver, which is a fairly easy tool to get in any hardware store. To prevent any damages to your board these bolts also come with a handy stainless steel washer.
Flat Allens is a great option if you don’t like the way button Allens feel on your feet. These are a mixture of Button Allens and Flat Phillips.
You need the same 1/8 inch Allen driver you would use on a Button Allen for this bolt as well. One advantage of this bolt is that it prevents stripping.
Having the right skateboard hardware to complement a good-quality board is a must if you want better skateboard rides. This hardware helps you ride faster and safer.
Without this setup, you risk causing injuries and accidents that might have a permanent impact on your lifestyle.
There are more than thousands of options to choose hardware sets from. With the help of our guide, you will be able to get your hands on the best fit for your longboard.
We've included well-known brands such as Fireball and Independent that have high rankings and have made appearances in many professional skateboarder’s hardware lists!
So, get your hands on the best skateboard hardware for an exciting but safe and smooth ride!